North Fork Payette River

To support FEMAs Risk MAP program, STARR acquired and processed LiDAR for 138 square miles surrounding Payette Lake and Lake Cascade in Valley County, Idaho.
The LiDAR data was captured using a twin engine fixed wing aircraft equipped with a LiDAR system. The LiDAR system includes a differential GPS unit and inertial measurement system. The Payette Phase II area encompasses 138 square miles, and required 52 flight lines. Data was collected at the highest FEMA specification which required a Nominal Pulse Spacing of 1.0 meter. A total of three missions were flown on May 7, 8 and 31, 2012. One airborne global positioning system (GPS) base station, P023 located near Payette Lake, ID, was used to support the LiDAR data acquisition. Documentation on this monument can be found in the Post-Flight Aerial Acquisition Report. Equipment used for the LiDAR acquisition: Optech ALTM Gemini LiDAR 2

Data Information
Data Type: Airborne
Area (sq. km): 357.418
Acquisition Date: 2012-06-08 – 2012-06-17
Sensor: Optech Gemini ALTM
Data vendor: AeroMetric, Inc., Sheboygan, WI
Funding: FEMA

Data Contact
Contact: Ryan McDaniel
Agency: Idaho Department of Water Resources
Contact email: Ryan.McDaniel@IDWR.idaho.gov

Data Download: Raw Point Clouds
Data from the ISU GIS Trec can be downloaded at accelerated speed using GlobusOnline service.
Part 1 (ISU GIS Trec – available using GlobusOnline)
Part 2 (ISU GIS Trec – available using GlobusOnline)
Supplemental Data (ISU GIS Trec – available using GlobusOnline)

Data Download: Online Value-added Products
2m DEM (ISU GIS Trec – available using GlobusOnline)